HP-8569B Spectrum Analyzer

Hewlett Packard HP-8569B
Spectrum Analyzer 0.01 - 22 GHz (optional bis 115 GHz).
HP-8569B Spectrum Analyzer

Der Mikrowellen - Spektrumanalysator HP-8569 B von HEWLETT-PACKARD besticht durch seinen grossen Frequenzbereich und seine Mikroprozessor unterstützte, praxisgerechte Bedienung. Seine exzellente Empfindlichkeit und interne Preselektion sichern einen grossen Störsignalabstand, wie dies für Anwendungen in Produktion, Labor, Messfeld und Überwachung nötig ist. Der HP-8569B dieses bekannten Herstellers (heute AGILENT) ist sehr vielseitig und kann für HF-, TV/SAT- und WLAN-Analysen sowie für Fehlerbeseitigungen, Reparaturen und Untersuchungen an Kommunikationsanlagen eingesetzt werden. Mit nur drei Drehknöpfen für schnelle Messroutinen, stimmt man auf das Signal ab und stellt die Abtastbreite und Verstärkung ein. Mit Hilfe des digitalen 2-Kanal-Speicherscopes lassen sich Messergebnisse abspeichern und dokumentieren. Mit dem eingebauten Mischer überstreicht das Gerät den Frequenzbereich von 0.01 bis 22 GHz. Externe Hohlleiter-Mischer (nicht im Lieferumfang) erlauben die Darstellung und Messung von Frequenzen bis 115 GHz. Für semi-automatische PC-Steuerung ist eine eingebaute HP-IB Schnittstelle vorgesehen. Direkte Dokumentation mittels HP-IB Plotter ist auch ohne die Notwendigkeit eines externen PC-Controllers oder Steuerungs-Software möglich.
High performance and simple operation are combined with unique microprocessor-controlled capabilities in the HP8569B Microwave Spectrum Analyzer. Excellent sensitivity and internal preselection assure the wide, spurious-free measurement range necessary for production applications, while the digital display and coupled controls speed measurement routines. This analyzer of this well proven brand HP (now AGILENT) has a variety of uses regarding radio frequency communication test, monitoring, troubleshooting and repair to research, to analyzing HF-, TV/Satellite or WLAN- signals. Three-knob operation provides use through coupled functions such as resolution & video bandwidth, frequency span and RF attenuation. The internal frequency range of 0.01 to 22 GHz is extended using external mixers (not supplied) to 71 GHz with other HP 11971 series mixers; and to 115 GHz with other commercially available mixers. For semi-automatic operation, connect a desktop computer to the HP 8569B via HP-IB to allow access to the displayed trace data and the control settings necessary to analyze or record measurements, or display operator messages and prompts on the CRT. Direct, hard copy output to a digital plotter is possible as well without the need of a controller or any programming.
Features:
Frequenzbereich: 0.01 bis 22 GHz in 6 Bereichen. EXT bis 115 GHz, optional.
Abtastbereich: 0.01 bis 1.8 und 1.7 bis 22 GHz (Multiband in einem Scan).
Eingangssignal: -123 dBm bis + 30 dBm (max. 1 Watt @ 50 Ω).
HF-Abschwächer: 0 - 70 dB in 10 dB/div., sowie FEIN: 1 - 12 dB.
ZF-Verstärkung: - 10 bis - 100 dB in 10 dB/div.
CRT-Display: Digital oder analog mit kontrastreichem, scharfem Bild.
Darstellungsbreite X-Achse: Gewähltes Band bis Zero-Span in 5-2-1 Schritten.
Darstellung Y-Achse: LOG mit 10, 5, 2 und 1 dB/div. oder LINEAR
Auflösung: 3 MHz bis 100 Hz in 3-1 Schritten und AUTO-RES.
Besonderheiten: YIG-Preselektor, PLL-Stabilisierung, Video-Filter, HP-IB.
Triggerung: Automatisch oder manuell (Sweeps von 2 µs/div. bis 10 s/div.) und EXT.
Sweep Trigger: FREE, LINE, VIDEO, EXT., SINGLE, RESET.
Interner Kalibrationsgenerator: 100 MHz, -10 dBm, 50 Ω.
Betriebsspannung: 100, 120, 220 und 240 (+ 5%, - 10%) VAC.
Gehäuse: 2 Frontgriffe, 2 Aufstellfüsse und seitlicher Tragegriff.
Abmessungen HxBxT: 188 x 426 x 552 mm.
Gewicht: ca. 29.2 kg.

FREQUENCY SPECIFICATIONS

Frequency Range 0.01 to 22 GHz

Specialities The HP-8569B is extendable to 40 GHz with Option E02, to 71 GHz with the HP 11971Q/U/V Mixers, and to 115 GHz with commercially available mixers.

Center Frequency Accuracy ± (5 MHz to 0.02% of center frequency, whichever is greater; + 20% of Frequency-Span/Div)

Frequency Spans 0.01 to 1.8 and 1.7 to 22 GHz: multiband span from 1.7 to 22 GHz in one sweep

Full Band Displays spectrum of entire band selected

Per Division 1 kHz to 500 MHz/div in a 1, 2, 5 sequence

Accuracy ± 5%, 20 kHz to 500 MHz/div unstabilized
± 15%, 1 kHz to 100 kHz/div stabilized

Stability

Total Residual FM < 100 Hz p-p in 0.1 sec stabilized

Noise Sidebands > 75 dB down, at 30 kHz offset

Resolution Bandwidths (-3 dB) 100 Hz to 3 MHz, in 1, 3 sequence

Resolution Bandwidth Accuracy ± 15%

AMPLITUDE SPECIFICATIONS

Maximum Safe Input Power

Total Average Continuous Power + 30 dBm

Peak Pulse Power + 50 dBm (<10 µs pulse width, 0.01% duty cycle) with 20 dB input attenuation

Gain Compression £ -7 dBm at the mixer for < 1 dB compression

Input Attenuator

Range 0 to 70 dB, in 10 dB steps

Step Accuracy £ 1.0 dB to 18 GHz, £ 1.5 dB to 22 GHz

Displayed Average Noise Level:
(1 kHz RBW,
3 Hz VBW,
0 dB input attenuation) Frequency (GHz) Average Noise (dBm)

0.01 - 1.80
1.70 - 4.10
3.80 - 8.50
5.80 - 12.9
8.50 - 18.0
10.5 - 22.0 -113
-110
-107
-100
-95
-90

Amplitude Accuracy

Frequency Response:
(Ref. to 100 MHz,
-10 dBm with 10 dB attenuation) Frequency (GHz) Frequency Response^*
(± dB max.)

0.01 - 1.80
0.01 - 4.10
0.01 - 12.9
0.01 - 18.0
0.01 - 22.0 1.2
1.5
2.5
3.0
4.5

^* Remark Frequency response includes input attenuator, preselector
and mixer frequency response plus mixing mode gain variation (band to band).

Reference Level

Range + 60 dBm to - 112 dBm in 10 dB steps and continuous 0 to -12 vernier

IF Step Gain £ 0.5 dB from -10 to -70 dBm; 1.0 dB from -80 to -100 dBm

Calibrator Output 100 MHz ± 10 kHz; -10 dBm ± 0.3 dB

Display Range

Log scale < 1, 2, 5, 10 dB/div over 8 divisions

Linear scale 0.56 µV to 224 V in 50 Ohm

Display Accuracy

Log scale < ± 0.1 dB/dB to ± 1.5 dB max, 0 to 70 dB range

Linear scale < ± 3% over full 8 division deflection

Residual Responses < -90 dBm, with 0 dB input attenuator and no signal at input

SWEEP SPECIFICATIONS

Sweep Time Auto: Sweep time is automatically controlled by Frequency Span/Div. Resolution Bandwidth and Video Filter controls to maintain an absolute amplitude calibrated display. Calibrated sweep times: 2 µs to 10 s/div in 1, 2, 5 sequence

INPUT OUTPUT CHARACTERISTICS

RF Input

Connector Type Precision type N-female

Input Impedance 50 Ohm, nominal

SWR (with > 10 dB input attenuator) < 1.3 from 0.01 to 1.8 GHz; < 2.0 from 1.7 to 22 GHz

LO Emission (2.0 to 4.46 GHz) < - 60 dBm from 0.01 to 1.8 GHz; < - 80 dBm from 1.7 - 22 GHz

HP-IB

Direct Plotter Control all displayed information can be transferred to an HP-IB plotter by using only front-panel pushbuttons

Interface Functions AH1, C0, DC1, DT0, E2, L4, PP0, RL0, SH1, SR0, T7

Auxiliary Inputs Blanking, External Sweep and Trigger, Retrace

Auxiliary Outputs Blanking, Horizontal Sweep, 21.4 MHz IF, Vertical

GENERAL SPECIFICATIONS

Operating Temperature 0 to 55 °C

Operating Humidity 95% R.H., 0 to 40 °C

Warm-up Time approx. 1 hour

EMI Conducted and radiated interference is in compliance with MIL-STD 461A methods CE03 and RE02, CISPR Publication 11 (1975), and Messempfänger - Postverfügung 526/527/79 (Kennzeichnung mit F-Nummer/Funkschutzzeichen)

Power-Line Requirements

Operating Voltage 100, 120, 220, or 240 (+ 5%, - 10%) VAC

Operating Frequency 48 to 66 Hz

Maximum Power 280 VA

Weight

Net 29.2 kg (64 lb)

Shipping approx. 35 kg (78 lb)

This specifications are taken from the HP-catalogue and are subject to change without notice.
Alle Angaben stammen aus dem HP-Katalog, Irrtümer und Änderungen sind ohne Ankündigung möglich.

FREQUENCY SPECIFICATIONS
Frequency Range	0.01 to 22 GHz
Specialities	The HP-8569B is extendable to 40 GHz with Option E02, to 71 GHz with the HP 11971Q/U/V Mixers, and to 115 GHz with commercially available mixers.
Center Frequency Accuracy	± (5 MHz to 0.02% of center frequency, whichever is greater; + 20% of Frequency-Span/Div)
Frequency Spans	0.01 to 1.8 and 1.7 to 22 GHz: multiband span from 1.7 to 22 GHz in one sweep
Full Band	Displays spectrum of entire band selected
Per Division	1 kHz to 500 MHz/div in a 1, 2, 5 sequence
Accuracy	± 5%, 20 kHz to 500 MHz/div unstabilized ± 15%, 1 kHz to 100 kHz/div stabilized
Stability
Total Residual FM	< 100 Hz p-p in 0.1 sec stabilized
Noise Sidebands	> 75 dB down, at 30 kHz offset
Resolution Bandwidths (-3 dB)	100 Hz to 3 MHz, in 1, 3 sequence
Resolution Bandwidth Accuracy	± 15%
AMPLITUDE SPECIFICATIONS
Maximum Safe Input Power
Total Average Continuous Power	+ 30 dBm
Peak Pulse Power	+ 50 dBm (<10 µs pulse width, 0.01% duty cycle) with 20 dB input attenuation
Gain Compression	£ -7 dBm at the mixer for < 1 dB compression
Input Attenuator
Range	0 to 70 dB, in 10 dB steps
Step Accuracy	£ 1.0 dB to 18 GHz, £ 1.5 dB to 22 GHz
Displayed Average Noise Level: (1 kHz RBW, 3 Hz VBW, 0 dB input attenuation)	Frequency (GHz)	Average Noise (dBm)
0.01 - 1.80 1.70 - 4.10 3.80 - 8.50 5.80 - 12.9 8.50 - 18.0 10.5 - 22.0	-113 -110 -107 -100 -95 -90
Amplitude Accuracy
Frequency Response: (Ref. to 100 MHz, -10 dBm with 10 dB attenuation)	Frequency (GHz)	Frequency Response^* (± dB max.)
0.01 - 1.80 0.01 - 4.10 0.01 - 12.9 0.01 - 18.0 0.01 - 22.0	1.2 1.5 2.5 3.0 4.5
*^ Remark**	Frequency response includes input attenuator, preselector and mixer frequency response plus mixing mode gain variation (band to band).
Reference Level
Range	+ 60 dBm to - 112 dBm in 10 dB steps and continuous 0 to -12 vernier
IF Step Gain	£ 0.5 dB from -10 to -70 dBm; 1.0 dB from -80 to -100 dBm
Calibrator Output	100 MHz ± 10 kHz; -10 dBm ± 0.3 dB
Display Range
Log scale	< 1, 2, 5, 10 dB/div over 8 divisions
Linear scale	0.56 µV to 224 V in 50 Ohm
Display Accuracy
Log scale	< ± 0.1 dB/dB to ± 1.5 dB max, 0 to 70 dB range
Linear scale	< ± 3% over full 8 division deflection
Residual Responses	< -90 dBm, with 0 dB input attenuator and no signal at input
SWEEP SPECIFICATIONS
Sweep Time	Auto: Sweep time is automatically controlled by Frequency Span/Div. Resolution Bandwidth and Video Filter controls to maintain an absolute amplitude calibrated display. Calibrated sweep times: 2 µs to 10 s/div in 1, 2, 5 sequence
INPUT OUTPUT CHARACTERISTICS
RF Input
Connector Type	Precision type N-female
Input Impedance	50 Ohm, nominal
SWR (with > 10 dB input attenuator)	< 1.3 from 0.01 to 1.8 GHz; < 2.0 from 1.7 to 22 GHz
LO Emission (2.0 to 4.46 GHz)	< - 60 dBm from 0.01 to 1.8 GHz; < - 80 dBm from 1.7 - 22 GHz
HP-IB
Direct Plotter Control	all displayed information can be transferred to an HP-IB plotter by using only front-panel pushbuttons
Interface Functions	AH1, C0, DC1, DT0, E2, L4, PP0, RL0, SH1, SR0, T7
Auxiliary Inputs	Blanking, External Sweep and Trigger, Retrace
Auxiliary Outputs	Blanking, Horizontal Sweep, 21.4 MHz IF, Vertical
GENERAL SPECIFICATIONS
Operating Temperature	0 to 55 °C
Operating Humidity	95% R.H., 0 to 40 °C
Warm-up Time	approx. 1 hour
EMI	Conducted and radiated interference is in compliance with MIL-STD 461A methods CE03 and RE02, CISPR Publication 11 (1975), and Messempfänger - Postverfügung 526/527/79 (Kennzeichnung mit F-Nummer/Funkschutzzeichen)
Power-Line Requirements
Operating Voltage	100, 120, 220, or 240 (+ 5%, - 10%) VAC
Operating Frequency	48 to 66 Hz
Maximum Power	280 VA
Weight
Net	29.2 kg (64 lb)
Shipping	approx. 35 kg (78 lb)
This specifications are taken from the HP-catalogue and are subject to change without notice. Alle Angaben stammen aus dem HP-Katalog, Irrtümer und Änderungen sind ohne Ankündigung möglich.

Für grössere Ansicht - bitte auf das Bild klicken.

Frontansicht
Rechte Seite
Totalansicht
Rückseite

100 MHz Generator
UKW-Sender
Hub 1 kHz-Res.
Hub 3 kHz Res.

Für grössere Ansicht - bitte auf das Bild klicken.
Frontansicht	Rechte Seite	Totalansicht	Rückseite
100 MHz Generator	UKW-Sender	Hub 1 kHz-Res.	Hub 3 kHz Res.